Gallery
Browse
(See All Items)
 
Roman

Roman
Call For Pricing 866-620-4999
Browse previous itemBrowse next item

Instructions for "ROMAN” Textured Surface (gloss)
- Two Coat Process

Roman is a Tobias Stucco® texture achieved with a smooth and light rough trowel technique, stain and gloss. Tobias Stucco® Stain comes in Terra- Cotta Grey, Yellow Grey and White Grey. Each can be used separately or once dry, one can be applied over the other for more depth.

  1. Apply 1st coat of Tobias Stucco® with a smooth trowel technique.
  2. Apply 2nd coat with a light rough trowel technique.
  3. Once dry, use a 3" bristle brush to apply Tobias Stucco® Stain over the surface. Cover the surface with the stain.
  4. Immediately use a clean white cloth to catch the runs and control the look of the finish.
  5. Wait until the surface is dry before adding fresh coats of the stain for deeper shades. Using a dryer will hasten drying time.
  6. Sand the surface lightly with an electric sander.
  7. Use 50 grit sand paper.
  8. Remove excess dust with a soft brush. Do not rub.
    Go over the walls very lightly.
  9. If desired, apply 1-2 coats of Safecoat Polyureseal Interior Clear Gloss-Satin with a 3” bristle brush.
  10. Allow 1st coat to dry before applying the 2nd coat.

 

*PLEASE NOTE: Arrows above scroll through the whole manufactures product line and not individual departments within it. Please navigate individual departments using navigation box to the left.


|
15150 140th Way SE Ste F103 Renton, WA 98058
|Phone: (425) 269-0037|Site Map|