Florentine

Instructions for "FLORENTINE" Textured Surface
- Two Coat Process

1. Apply 1st coat with a smooth trowel technique.
2. Apply 2nd coat freely with a rough trowel technique. Take crumpled newspaper and pounce all over the entire wet surface. Periodically change paper formation and replace newspaper when necessary.
3. Let Tobias Stucco® dry for approximately 1 hour and knock it down with a trowel.
4. When dry, lightly sand the surface with an electric sander.
5. Use a 50 grit sand paper.
6. Sand until the surface is smooth not flat.
7. Sanding will create color variations.
8. Remove excess dust with a soft brush. Do not rub. Go over the walls very lightly.
9. Wear a mask while sanding.